Name: Reversible Air Drill
Item No.: HN-AD150

Features:
Casting iron cylinder;
Drill chuck is processed by advanced heat treatment;
Wear resistance;
Strong steady;
Gravity die casting molding housing;
prominent air tightness;
Rear exhaust;
Special surface treatment;
Comfortable grip;
Suitable for drill and tap of steel plate, aluminum plate, board, IC plate and plastic plate.
Specification:
 
Image Details:





Connectivity:
Air Supply & Pressure
• Always use a clean and dry air supply to operate the tool at 90psi.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
• Use a fitting air hose for connection between the compressor & tools.
• Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
• Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
injury.
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
• Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
 
FAQ:

1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.

2.Q: About your products, could you do it OEM?
 A: Yes, OEM is workable for us, but with MOQ.

3.Q: Have you guarantee for your products?
 A: Normally we provide half year guarantee with spare parts supply.

4.Q: Do you also provide spare parts of pneumatic tools? 
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.

5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.

6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.

7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.

8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.

9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.




 

Elevator Control Modernization

Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

REASONS TO MODERNIZE YOUR ELEVATOR CONTROLS:

• You are experiencing higher repair costs related to controls
• Inefficient, poor reliability and operation
• Public safety considerations
• Long customer/tenant wait times
• Increased shutdowns and entrapments
• Landing and leveling problems
• Poor ride quality
• Decrease energy costs
• Serviceability/Proprietary Controls
• Obsolescence
  

CEP Elevator Products specializes in custom elevator control modernization, ranging from simple updating of controls, cab and hall fixtures, to extensive replacement of all your existing elevator equipment. Elevator modernizations keep older buildings competitive with newer buildings, and typically provide a good financial return on your building as well as improving your elevators safety, reliability and performance. Depending on the age and condition of your elevator equipment, the extent of the modernization may vary. We can provide you with a free survey of your current equipment, and provide detailed information regarding the range of options for your upgrade. In addition to increasing the reliability and performance of your elevator, We will bring your elevator equipment up to current codes.

We only uses the best available equipment when performing modernizations. All modernizations begin with non-proprietary control systems and equipment which will enable you to use any qualified elevator service company of your choice to maintain your equipment in the future. Many large, international companies will only install their own proprietary controls and equipment which make it virtually impossible for building owners to change service companies down the road, regardless of the quality of service. This not only locks the building owner to one service company for the life of the equipment, it can also be costly in higher repair and maintenance costs.

After performing modernizations for over two decades, We have the experience and expertise to select the best individual components for your elevator. Many companies try to save money by cutting corners and using lower quality components; however we believe that the slightly higher price of the best components is well worth the cost to ensure that you not only get the look you expect, but also the performance and reliability for many years to come.

Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjsmartcommercialescalators.com