WRY-type heat pump support the use of a double-ended ball bearing structure of the support structure, the front end is lubricated with grease, the rear end is lubricated with grease, the middle of a guide tube to observe the sealing at any time and the recovery of HTF. The self-heating cooling structure, changing the traditional water-cooled structure, so that the structure is simple, small size, saving operating costs, good performance, the use of reliable. WRY-type heat transfer oil pump: (1) the combination of packing seal and mechanical seal, packing seal with high temperature filler, has a good thermal adaptability, and mechanical seal is the use of mechanical strength, good wear resistance of the hard Quality alloy materials, to ensure the sealing performance under high temperature conditions. (2) The third generation of PTFE (referred to as PTFE) lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely strong corrosion resistance. WRY-type heat transfer oil pump advanced technology, high efficiency, can be long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, and other features in our heating medium heating system has been widely used, has entered the petroleum, Chemical industry, rubber, plastic, pharmacy, textile, printing and dyeing, road building, food and other industrial fields. It is mainly used for conveying weakly corrosive high temperature liquid without solid particles. It is an ideal hot oil circulation Pump. Structural Features: WRY-type heat transfer oil pump is the unit of digestion and absorption of foreign oil pump developed on the basis of the second-generation products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet axial suction outlet vertical Up, and motor mounted on the base.
Ceramic Sink,Ceramic Cabinet Basin ,Countertop Sink
Bathtub Basin Co., Ltd. , http://www.cnsinks.com