[Asia pump network hearing] Vortex pump is also known as high-pressure blower, high-pressure blower, it is a dual-purpose ventilation air source. So what should you pay attention to during installation? What should we pay attention to when installing the vortex pump? First of all, understand the specification, form of the vortex pump, the position of the air inlet and outlet, the corresponding installation dimension, the power requirement of the motor and so on. 2, the installation should be carefully checked before the pump is damaged, if damaged, until the repair properly, before installation. 3, the installation should pay attention to check whether the loose parts of the connection, the blade and the tube should be uniform gap, shall not touch. Exhaust fan and exhaust fan should be set interlock device, when any one of the exhaust port is opened, the exhaust fan that can automatically start. 4, the weight of the joint tuyere pipe should not be borne by the vortex pump air duct, the installation should be coupled with the support frame. 5, impeller rotation direction must be consistent with the arrowhead roof fan head mark. 6, whirlpool air pump, fan base must be naturally bonded with the foundation plane, do not beat the base mandatory connection, to prevent the base deformation, the installation should be corrected base, add horn, the basic level, and then tighten the anchor bolts. 7, after the installation is completed, you must first experiment, to be functioning properly, before allowing official use. 8, the installation is completed Use the process to regularly check the fan components, check the bearing lubrication is sufficient to ensure that the fan can start normal work. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http: //beng.liuti. cn / (Service Hotline: 400-6030-811)