1, hot air welding method: hot air welding is the use of cold air from the air pump through the core of the plastic welding torch after the publication of hot air from the spray, heating phase damage and plastic welding rods to melt them to achieve welding and adequate subsidies Purpose of imprisonment.
2. Solvent-bonding method: The appropriate plastic solvent is used to glue the cement evenly on the adhesive surface for a few seconds until the performance is sticky so that both faces the table. In order to fully achieve the close-fitting and ideal use effect, proper pressurization should be performed until the setting is solidified. Depending on the nature of the adhesive surface, it may be possible to use a brush, a vice knife or a spray gun, etc. for the viscous cement.
3, spot welding and adhesive bonding method: When performing spot welding and adhesive bonding can not only uniform distribution of force, and welding joints can play a reinforcing role, is conducive to cracks and longer cracks or larger The holes are repaired. In order to prevent the thermal damage of the bonding layer from being damaged by high temperature, the solder joints shall be placed after the spot welding. The solder joint spacing may be determined according to the actual situation, after which the glue joints are removed and the bonding is continued.
LED street light has revolutionized outdoor lighting, offering numerous advantages over traditional lighting technologies. With their energy efficiency, long lifespan, and superior performance, LED street lights have become the preferred choice for illuminating roads, pathways, and public spaces. However, not all Outdoor Adjustable Street Light Fixture is created equal. There are various classifications and types of LED street lights available in the market, each designed to meet specific requirements and deliver optimal lighting solutions.One of the primary classifications of Outdoor LED Street Lights is based on their wattage or power consumption. LED street lights are available in a range of wattages, typically ranging from 20 watts to 400 watts or more. The wattage determines the brightness or lumen output of the Outdoor LED Street Light, and different wattages are suitable for different applications. Lower wattage LED street lights are often used for residential areas, pedestrian pathways, or small parking lots, while higher wattage lights are more suitable for major roads, highways, and large parking areas.
Another important classification of LED street lights is based on their optical design and light distribution patterns. LED street lights are available in various beam angles, including wide, medium, and narrow beams. The beam angle determines the spread and concentration of light, allowing lighting designers to choose the most appropriate option for specific applications. For example, a wider beam angle may be preferred for illuminating large open spaces, while a narrower beam angle may be more suitable for focusing light on specific areas or reducing light pollution.
Led Street Light,Smart Street Light,Iot Street Light,Outdoor Adjustable Street Light Fixture,Outdoor LED Street Light
WOSEN LIGHTING TECHNOLOGY LIMITED , http://www.wosenled.com