[China Aluminum Network] There are many specifications for aluminum buckles, including panel widths, thicknesses, and hemming heights. The selection should be based on the characteristics of the home bathroom. The aluminum profile plate is divided into two types: punched and flat surface. Surface punching can breath sound-absorbing. The inside of the buckle plate is covered with a layer of film cushion. The moisture can be absorbed by the film through the punching hole, so it is more suitable for the kitchen with more moisture. On the market 600mm × 600mm micro-hole square plate, C150, C100 strips and 300 × 300,300 × 600 aluminum strips are more widely used.
The quality of aluminum profiles is not entirely thin and thick. The key lies in the texture of aluminum. The aluminum buckles used in general projects are 0.8 millimeters or even thicker. Because of the quality of aluminum itself, manufacturers want to make the aluminum buckle plate very thin but not possible, because the aluminum profile is not good, the board can not be very thin, so manufacturers can only do thick. Therefore, to identify the aluminum buckle plate, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the plate is uniform or not.
Phillips Bugle Head Screw,Phillips Flat Bugle Head Screw,Bugle Head Cross Recessed Drywall Screw,Phillips Hex Head Self Drilling Screw
Handan Jiankun Hardware Products Co., Ltd / Handan best import and export trade co., Ltd , https://www.jkscrew.com