Non-explosive demolition / cracking agent is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly.
As requirements for demolishing rock and reinforced concrete in construction increase in tight quarters, the use of explosives and explosive agents is becoming more restricted as far as safety and environmental pollution problems are concerned. Non-explosive demolition / cracking agent is the solution.
Non-explosive demolition / cracking agent is a powder with amazing 18,000 PSI expansive strength when mixed with common water. Poured into holes, Non-explosive demolition / cracking agent breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking.Â
Since Non-explosive demolition / cracking agent provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust.
Reinforced Concrete Demolition & Cutting
In demolition, concrete cutting & excavating industry, Non-explosive demolition / cracking agent helps you to break reinforced concrete and rock into chunks, so you may easily cut off rebar, haul it away with a crane or truck without damage remaining part.Â
Rock Breaking & Excavation Â
In mining and quarrying industry, Non-explosive demolition / cracking agent helps to achieve perfect slabs and blocks from limestone, onyx, marble, granite or any other type of stone you are working with. Compares to blasting, Non-explosive demolition / cracking agent avoids waste of valuable stone, high insurance, costly storage and labor.
Stone Quarrying & Dimension
Non-explosive demolition / cracking agent can also be applied along with traditional methods like primer cord, hydraulic breaker, diamond blade saw and jackhammer to help cut cost, work time and increase safety, Plus its silent operation, Non-explosive demolition / cracking agent is perfect for residential, school, hospital and airport area.
Alternative to Blasting, Breaker, Jackhammer, Diamond Saw...
Non-explosive demolition / cracking agent helps your work to become more efficient and cost effective.Â
Applications
A. Granite, marble, sandstone, limestone, quartzite quarrying and cutting
B. Rocks pre-splitting, fracture, cutting, demolishing and removal
C. Controlled demolition or cutting concrete when explosives not allowed
D. Fracture and demolition of the concrete buildings and structuresÂ
E. Â Rocks cutting for road constructionÂ
F. Excavation of trenches and foundationsÂ
G. Â Underground excavations and removing bouldersÂ
H. Â Marine excavations including underwater operations
Package & Storage
Container and Storage Non-explosive demolition / cracking agent is packed in 4 anti-moisture bags of 5 kg (11 lb.) each and then placed in a water proofed carton with a total weight of approximately 20 kg (44 lb.).
Although Non-explosive demolition / cracking agent is packed in anti-moisture paper bags, long storage may cause deterioration of its working ingredients. Therefore, store in a dry place and use it as soon as possible.
When storing, do not place the bags of Non-explosive demolition / cracking agent directly on floor, put them on a pallet and keep in a dry warehouse etc. Non-explosive demolition / cracking agent, stored in this manner, can be effectively used for about 1 year.
Non-explosive demolition / cracking agent should be unpacked before use.
When storing the portion of Non-explosive demolition / cracking agent remaining after use, push the air out of the bag, then seal with gum tape and use as soon as possible. However, as it may get exposed to moisture there is a risk of Non-explosive demolition / cracking agent losing its effectiveness once the bag has been opened.
If you receive broken bags of Non-explosive demolition / cracking agent, they may not work due to chance of moisture absorption.
Type
| Type of SPLITSTAR | Usable temperature |
| SCA-1 | 25°C-40°C (77°F-104°F) |
| SCA-2 | 10°C-25°C (50°F-77°F) |
| SCA-3 | -5°C-10°C (23°F-50°F) |
| SCA-4 | 40°C-50°C (104°F-122°F) |
Consumption
| Hole diameter(mm) | 30 | 32 | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 |
| Consumption(kg/m³) | 1.2 | 1.3 | 1.5 | 1.7 | 1.9 | 2.1 | 2.3 | 2.5 | 2.8 | 3.0 | 3.2 |
| Hole depth (m) | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 | ||||||||||
Quantity of splitstar used per 1m3
| Kinds of objects to be demolished | Standard quantity of splitstar per 1m3 | ||
| Rocks | Soft rock | 5-8kg | |
| Medium rock | 8-12kg | ||
| Hard rock | 12-20kg | ||
| Concrete | Plain concrete | 5-8kg | |
| Reinforced concrete |
Concrete including less quantity of re-bars | 10-25kg | |
| Concrete including much quantity of re-bars | 20-35kg | ||
| Bricks | Â | Â | 10-25kg |
Â
Activated Carbon is a very small carbon particle with a large surface area, and there are even smaller holes in the carbon particle-capillary. This capillary has a strong adsorption capacity, because of the large surface area of the carbon particles, it can be in full contact with gas(impurities). When these gases(impurities) touch the capillary, they are adsorbed and act as purifiers. The study of the surface area of activated carbon is very important. The detection data of the specific surface area of activated carbon is only true and reliable by using the BET method. At present, there are many instruments in China that can only be detected by direct comparison methods. Now it is also in China. It was eliminated. At present, multi-point BET method is used for specific surface area testing at home and abroad. The specific surface area measurement standards formulated at home and abroad are based on BET test methods. See the Chinese National Standard(GB/T 19587-2004)-BET principle for the determination of the surface area of solid substances. The specific surface area detection is actually a more time-consuming task. Due to the different adsorption capabilities of samples, the testing of some samples may take a whole day. If the test process is not fully automated, the testers can not leave at all times. And to be highly focused, observe the dashboard, control the knob, and inadvertently lead to the failure of the test process, which will waste a lot of valuable time for the tester. The F-Sorb 2400 ratio surface area tester is an instrument that can truly achieve the BET method detection function(with a direct comparison method). The more important F-Sorb 2400 ratio surface area tester is the only fully automated and intelligent surface area detection device in China so far., Its test results are highly consistent with international standards and have good stability. At the same time, it reduces human error and improves the accuracy of test results.
Adsorption Activated Carbon,Dry Activated Carbon Desiccant,Graphite Particles Carbon Agent,Capacit Granular Activated Carbon
NINGXIA SINOTOPSKY INTERNATIONAL TRADING CO.,LTD. , http://www.nxsinotopsky.com