}Product Features | Energy-saving | l ed roadway lights ||The only mine explosion-proof 15 lane lights | custom roadway lights ||
1. Explosion-proof , 2. Safety , 3. Stable, 4. High quality and safety level , 5. The main products are mainly yellow.
} Applicable occasions [ energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
Applicable to underground coal mines with methane and coal dust explosive gas mixtures. It is suitable for lighting in coal mine transportation roadways, bottom yards, electromechanical chambers, return air roadways, and coal preparation plants.
} Product Overview [ Energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
The LED roadway lamp uses the most advanced green light source and high-power LED as the light source, designed and manufactured according to national standard GB386.1.2.3-2000 for Explosive Environmental Electrical Equipment. The explosion-proof mark is ExdI, and the product has passed the coal industry's Shanghai explosion-proof electrical inspection station, obtaining a national mine safety certificate issued by the product safety sign center.
} Features[ Energy-saving led roadway lamp / only mine explosion-proof 15 W roadway lamp / customized roadway lamp]
â—† Mine explosion-proof LED roadway lamp uses international advanced electronic integrated circuits, wide voltage design, and can work normally at voltages between 85V and 265V. The light source uses DC and low-voltage power supply, with no stroboscopic effect or electromagnetic interference, no red (purple) external radiation, and no mercury vapor or other pollutants found in fluorescent lamps. This meets EU future lighting production standards, making it a safe and healthy lighting source with clear environmental benefits. .
â—† The power consumption is extremely low. Under the same illumination, the power consumption is only 1/10 of that of an incandescent lamp and 1/2 of that of an energy-saving fluorescent lamp, showing significant energy-saving effects.
â—† The structure is reasonable, the appearance is beautiful, the size is small, the weight is light, and it is explosion-proof, anti-shock, vibration-resistant, heat and humidity resistant, with good sealing and maintenance-free characteristics.
â—† The lamps use a power light source and a separate wiring sub-space design, which not only improves the appearance but also enhances the lamp's explosion-proof, impact, and shock resistance performance, fully complying with national and industry standards for mine explosion-proof lamps.
} Installation method: [ energy-saving led roadway lamp / the only mine explosion-proof 15 W roadway lamp / custom roadway lamp]
1 First, determine the installation position and mode based on the actual needs of the work site, then prepare a corresponding length of Φ8 ~ Φ14 mm three-core cable according to the distance from the lamp to the power contact point.
2 Open the set screw on the side of the upper cover of the lamp, loosen the compression nut of the lamp cable inlet, open the upper cover, introduce the power cable through the compression nut to the internal terminal, and connect it as shown in the diagram. Then tighten the cable tie nut and the lamp cover.
3 When replacing the lamp, unscrew the hexagon socket set screw that fixes the lamp ring, remove the lamp ring and transparent component and the lamp body, replace them with new ones, and install the lamp in the reverse order.
Caution:
1. Turn off the power before replacing the lamp or disassembling the lamp.
2. It is strictly prohibited to turn on the electricity.
3 , when using, the surface of the lamp may become warm, which is a normal phenomenon; the central part of the transparent component may be hot and should not be touched.
4. When installing the luminaire, it must be safely grounded.
Performance parameters
} Main technical indicators | Energy-saving led roadway lamp / only mine explosion-proof type 15 W roadway lamp / customized roadway lamp]
1. Explosion-proof performance: conforms to national and industry standards.
2.IP rating: IP65
3. Working environment: -20 degrees - +60 degrees
4 power specifications: 10W, 15W, 18W, 20W, 24W, 30W, 36W, 50W, 60W, 100W
5. Weight: DGS20 ( 30 ) /127L ( A ) type lamp 2.73 kg
6. Power supply: AC85V-265V , 50HZ
7. Illuminance: Lx (3 meters ) ≥ 45
8. Rated voltage: 127V
|| Energy-saving led roadway lamp division || http://qqhjxd.cn.china.cn ||
Wired video doorphone,indoor unit,outdoor unit,video doorphone,video doorbell,7 Inch Color Video Intercom,Wired Door Bell Interphone Screen,Video intercom doorbell,Wired Video Intercom System
Foshan Shunde Advante Electron Ltd. , https://www.china-advante.com