Abstract The Ministry of Industry and Information Technology released the "Grade Industry Access Conditions" and "Carbon Disulfide Industry Access Conditions (Draft for Comment)" yesterday (December 7). "Graphite Industry Access Conditions" said that the graphite line during the "Twelfth Five-Year Plan" period...
The Ministry of Industry and Information Technology released the "Grade Industry Access Conditions" and "Carbon Disulfide Industry Access Conditions (Draft for Comment)" yesterday (December 7). The "Grade Industry Access Conditions" stated that the development of the graphite industry during the "Twelfth Five-Year Plan" period should be based on domestic demand, strictly control the increment, focus on optimizing the stock, vigorously adjust the structure, promote mergers and acquisitions, and improve industrial concentration. Newly built and rebuilt and expanded beneficiation projects (excluding tailings comprehensive utilization projects) must adhere to the principle of equal or reduced replacement and be linked to the elimination of backward production capacity. Encourage the construction of graphite industry clusters in resource-rich areas and industrially advantageous areas to accelerate the development of graphite processing products.
The “Grade Industry Access Conditions†also require that it is strictly forbidden to be outside the boundary of the urban planning area in areas such as scenic spots, ecological protection areas, natural and cultural heritage protection areas, drinking water source protection areas, urban built-up areas and urban non-industrial planning areas. New and expanded graphite projects within 1 km, as well as national and local environmental protection and safety protection distances. If the graphite project that has been put into operation in the above-mentioned areas fails to meet the relevant requirements for access conditions, it should be achieved by the end of 2014 through rectification.
In terms of production scale, process and equipment, the “Grade Industry Access Conditions†requires: new and rebuilt and expanded scale graphite beneficiation projects with a design scale of not less than 20,000 tons/year and a single-line scale of not less than 5,000 tons/year; Reconstruction and expansion of microcrystalline graphite ore dressing project, the design scale is not less than 150,000 tons/year, the single-line scale is not less than 30,000 tons/year, and the ore recovery rate is not less than 85%; the new high-purity graphite project is expanded and expanded, and energy conservation is adopted. The advanced technological route of environmental protection, the scale is not less than 5,000 tons / year, and the finished product rate is not less than 85%.
The “Environmental Conditions for Carbon Disulfide Industry (Draft for Comment)†requires that the scale of a new set of carbon dioxide production equipment for new construction, renovation and expansion shall not be less than 20,000 tons/year, and the total scale shall not be less than 50,000 tons/year; The backward charcoal carbon disulfide production equipment, after the implementation of the access conditions within two years, the elimination of coke as raw material intermittent coke carbon disulfide production equipment, the existing intermittent coke carbon disulfide production equipment safety, environmental protection does not meet the requirements of this access, It should be rectified immediately, and it can continue to be produced after passing the inspection and acceptance by the relevant departments; the new, rebuilt and expanded carbon disulfide production equipment must adopt continuous advanced production technology and equipment. In areas that are in line with natural gas utilization policies and natural gas supply, international advanced The natural gas clean production process produces carbon disulfide.
Angle Valve,Brass Angle Valve,Traditional Angle Valve,Sanitary Triangle Valve
Bathroom Faucet & Kitchen Faucet Co., Ltd. , http://www.htc-faucets.com