Common floor tiles are: vitrified tiles, polished tiles, matt tiles, glazed tiles, printed tiles, non-slip tiles, special acid-proof floor tiles
The quality of the floor tiles is very professional, reminding you to pay attention to:
First, check to see if the color of the tile body is pure. This trick is very simple, mainly to observe whether the color of the back of the tile is uniform and consistent. Tiles of good quality, the color of the blank is uniform and symmetrical.
Second, it is necessary to observe whether the particles of the cross section of the tile are fine. Consumers should note that the cross section referred to here does not refer to the cut surface around the tile, but to the break of the tile fragment. In general, the break is fine, hard and brittle, and the color is consistent. Because the fine particles of the tiles are waterproof, and the tiles with larger particles, the water is easily immersed and affects the quality.
Third, pay attention to the thickness of the glaze layer. Tile glaze is what we call the entire surface of the tile, and the thickness of the glaze is the thickness of the glazed cross section. Glaze is the most expensive material in the cost of ceramic tiles. The thicker the glaze, the better the natural quality.
Fourth, you have to listen. Tap the tile and pay attention to whether the sound is crisp. If the sound is clear and pleasing to the top, such as dull sound, it is a defective product.
Fifth, we must test the water. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, look at the marks left by the front water. The density of the tile that is slow to infiltrate after the water is dispersed is large, and the water-retaining impression is not obvious, and it is regarded as the top grade.
Sixth, take two bricks back to back and face to face to see if it can be closely contacted with or without gaps to determine whether there is warpage.
Seven, find the ink on the surface after an hour to scrub to see if there are traces, no trace is a good brick, there is no choice to infiltrate
Eight, take two bricks and two bricks of the geometric size of the length and width and the diagonal deviation of the brick size deviation is superior
Nine, can refer to the test report issued by the national or industry testing agency provided by the merchant, compare the following indicators data: water absorption, wear resistance, acid resistance and pollution indicators identification comparison.
Plasma Cutting Machines are machines that process metal materials by means of plasma cutting technology.
Plasma Cutting Machine structure:
1. The frame adopts all-welded structure, which is firm and reasonable, easy to operate and durable.
2. Plasma Cutting Machine with cutting speed and high precision. The cutting mouth is small, neat and has no slag. On the basis of the traditional numerical control system, the control method for cutting is improved, and the secondary dressing processing is avoided.
3. Plasma cutting machine suitable for low carbon steel, copper, iron, aluminum, galvanized, titanium and other metal plates.
4. The CNC system configuration is high. Automatic arc ignition, stable performance, the success rate of arc ignition is more than 99%.
Plasma Cutting Machine
Stainless Steel Blade,Plasma Cutting Machine,Metal Plasma Cutting,Stainless Steel Blade
Jinan Huaxia Machinery Equipment CO.,Ltd , http://www.huaxiacnc.com