1. Can't charge: Does the AC power supply voltage match the voltage marked on the product? The fuse is blown (using the AC motor type)
2. No display: Whether the internal battery is under voltage causing automatic shutdown (there is a built-in battery type); whether the AC power supply voltage matches the voltage marked by the product, whether the fuse is blown (using the AC motor type)
3. Invalid manual zeroing: whether the manual zeroing range is set too small, and the current reading is stable. 4. The digital scale of the electronic platform scale: whether the sensor connection is good or not, whether the sensor and the display are damp, if the sensing is too small, the AD conversion rate is too low. Whether it is set too high, whether there is interference such as vibration, wind blowing, and whether the weighing platform touches objects.
5, the electronic scales can not be calibrated: calibration weight is too small to use, whether the weight weight and the nominal value deviation is too large (usually to use 6, poor linearity: whether the sensor protection device works whether linear correction (linear Correction type) Linear calibration correct weight used (linear correction type), whether sensor overload 7, can not print: printer type is set correctly, the reading is stable, the stability mark is bright, printer connection Is it plugged in, whether the printer power is on, and whether the printer is online (24-pin printer only)
8. Do not return to zero after unloading: whether the zero tracking setting is too small and whether the weighing platform touches foreign objects.
9, electronic scales can not be accumulated: whether the accumulation of zero before the accumulation of whether the stability of the cumulative key 10, can not communicate through the serial port: baud rate, sending mode is set correctly, RS-232C connection contact is good, RS-232C Whether the connection is too long 11. The boot is not reset to zero: whether the auto-zero range is set too small and there are items on the scale platform.
12. The checkweighing of the electronic scale is invalid: whether the current weight is less than the minimum capacity, and whether the check weight is turned on.
13. The electronic scale cannot be weighed: whether the sensor connection is firm and whether it has been calibrated (linear calibration must be performed first)
Wrong code) Whether it is entered with the super user password (software protection type), whether it is short-circuit correction jumper (seal protection type).
15, backlight is invalid: whether the battery is insufficient, the current weight is less than the minimum capacity.
Yihe-chem Co.Ltd. is a professional Color sorter supplier in China,our Maxsorte color sorter is a famous brand in the industry and it is the earliest one who started to develop and manufacture color sorter in China.
Following is some introduction about color sorter for your reference.
The machine can select the good products and delete bad ones,it can be used in many industries,especially in agriculture and mining industry for any products in granule with different colors.The technical features of Maxorte color sorter enable work that is simply impossible by hand or extremely time consuming to do by hand.The perfect function help a lot in improving quality of final products.In addition to traditional selecting machineries,color sorter is the right option for flour mills,rice mill and plants storing and processing grains.
Performance Automatic Concrete Block Making Machine
Block Making Machine,Brick Blocking Machine,Cement Brick Making,Hollow Block Making Machine,Paver Block Making Machine
shijiazhuang yihe-chem co.,ltd , https://www.yihe-chem.com