[China Aluminum] The technical staff said that the aluminum die casting mold processing process usually produces some of the more common problems, because each type of problem is caused by different reasons, so in the actual processing of these issues need to be addressed It must be dealt with based on the actual problem. Topstar's follow-up customer profile summarizes several common solutions: 1. Clean the parting surface, clean the cavity, clean the top lever, change the coating material, improve the spraying technology, strengthen the mold clamping ability, and strengthen the weight of the poured metal. This is some method that can be implemented by simple manipulation. 2, adjust the processing technology parameters, shot ability, shot speed, fill the mold time, open the mold time, pouring temperature, mold temperature and so on. 3, the replacement principle, select the high quality aluminum alloy ingot material, improve the proportion of new principles and remelting principle, improve the smelting processing skills. 4. Trimming and changing aluminum die-casting molds, trimming and changing the pouring system, strengthening the internal pouring port, increasing the setting of overflow tanks, exhaust gas tanks, etc.