RCY-ZX series permanent magnetic automatic iron remover is composed of three parts: pipeline body, driving device and magnet running device. The driving device is installed on the wall of the pipeline. The sprocket and chain drive the magnet operating device in the magnetic separation chamber of the pipeline. The permanent magnets discharge the ferromagnetic substances mixed in the pipe material out of the pipe through the tap hole.
working principle:
The iron remover is connected in series to the material conveying pipeline with an inclination of 45-75 degrees. When the material flows through the iron remover, the ferromagnetic material therein is adsorbed on the Stainless Steel Pipe wall of the iron remover of the pipe and gradually moves along with the movement of the permanent magnet. Slide in the direction of the taphole to achieve separation from the material. At the tap hole, due to the permanent magnet moving away in the direction of cyclical motion, the ferromagnetic material loses its magnetic attraction and is discharged from the tap hole under the action of gravity to achieve automatic iron removal of the material.
Features:
This equipment uses high remanence NdFeB as a magnetic source, with high iron removal efficiency and long service life.
The power source adopts a small-power cycloidal pinch gear motor, and the transmission adopts a precision roller chain, which has the advantages of small size, light weight, reliable and stable operation, and low failure. The user is easy to use and easy to repair.
The structure of the device is reasonable, compact, and easy to install. It can be used in series connection with the material conveying pipeline.
The iron removal process is continuous and automatic and there is no need to look after the equipment starts.
Suitable for closed material conveying system, no dust escapes during work, no environmental pollution.
The wall of the pipeline is made of special wear-resistant material, which has doubled the service life.
Application scope:
Pipeline separator is a high-performance automatic magnetic separation equipment, which can be widely used in cement, electricity, ceramics, brick, chemical, food, glass, metallurgy, steel and other industries, is the first choice for material purification and ensure the safe operation of subsequent equipment. Iron removal equipment.
2. Pipeline manual unloading iron permanent magnet separator:
RCYA1, RCYA2 series of pipeline permanent magnet separator includes non-magnetic pipe and permanent magnet in two parts, dedicated to the non-magnetic material in the closed pipe iron removal, permanent magnet separator using high-performance hard magnetic materials to form a composite magnetic system. It has the characteristics of small size, large magnetic force, light weight, clean iron removal, convenience, no energy consumption and long service life. Applicable without conveyor belt, can only provide chute occasions. When the bulk material passes through the pipeline-type permanent magnet separator, the iron debris is adsorbed by the high-strength permanent magnets. When the iron impurities are removed, the pipeline-specific door is opened to remove the impurities. Mainly used in cement, chemical, plastic, refractories, building materials and other industries in the removal of debris in the pipeline.
3, RCDC air-cooled dumper electromagnetic separator:
RCDC series of air-cooled self-dumping electromagnetic iron remover is based on RCDA series of air-cooled overhanging-hanging magnetic iron remover. It has an iron-iron mechanism composed of a drive motor, a roller, and a scrap iron tape. During the working process, the iron mechanism automatically throws the ferromagnetic substances adsorbed on the iron belt into the iron box outside the iron remover, eliminating the need for manual cleaning of power interruptions, and automating iron removal. In iron and steel plants and cement plants, they are mostly used for important equipment such as slag iron removal and protection roller presses, vertical mills and crushers.
4, CTS (NB) wet magnetic cylinder magnetic separation:
Permanent magnetic drum type magnetic separator is suitable for mines, coal preparation plants and other units, used for weak magnetic field wet sorting of ferromagnetic minerals of fine particles, or removal of mixed ferromagnetic minerals in non-magnetic minerals. The machine has three types of tanks: semi-counterflow tank (CTB); downstream tank (CTS) and counter-current tank (CTN), which are suitable for different sorting granularity and different sorting process requirements. Product features are: the use of computer optimization design, reasonable magnetic circuit and the strict selection of high coercivity, high remanence of permanent magnets, to ensure that the magnetic properties are not reduced for a long time, to protect the long-term interests of users, the overall structure of a reliable and durable. CTS (NB) series permanent magnet drum type magnetic separator has two kinds of rotating and fixed magnetic field components, and the fixed type is mainly applied to weak magnetic field wet type fine magnetic particles, or removes non-magnetic minerals. When the slurry is injected into the magnetic field, strong magnetic minerals are adsorbed on the surface of the cylinder, and the weak magnetic and non-magnetic minerals are eliminated in succession, while the strong magnetic minerals adsorbed on the cylinder are taken out of the magnetic field with the rotation of the cylinder. Rotary type is suitable for dry separation of fine-grained (medium-strength) magnetic minerals. Due to the effect of high-speed rotation, the number of magnetic tumbling of magnetic particles is much higher than that of conventional magnetic separators, which has significant effects on destroying magnetic agglomeration and increasing the enrichment ratio. The effect is that the minerals are separated into two kinds of magnetic and non-magnetic materials after sorting. They are excluded from their respective discharge ports. The machine is suitable for rough selection and selection of ores with a particle size of 6-0mm.
Socket elbow, after ingot or rod heating forging molding, then lathe processing.socket elbow standards GB / T14383-93, GB / T14383-2008, American Standard ASME B16.11, petrochemical standard SH3410, Ministry of Chemical Industry Standard HG / T21634, etc.In the form it is divided into 45 ° socket elbow and 90 ° elbow socket.In accordance with common standards, socket elbow specifications are DN6, DN8, DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100. Commonly used specifications for ordering the use of DN15 ---- DN50. If out of range of the specifications, can produce according to customers drawings and design.
Product:Socket Welding Elbow
Size:DN6-DN100
Materials:A105,304,304L,316,316L,321, Q235,20#,16Mn,12Cr1MoV,F11,F22....
Pressure Level: 2000LB,3000LB (SCH80),6000LB (SCH160),9000 (XXS).
Standard:ASME B16.11,MSS SP-83,MSS SP -79,MSS SP-97,MSS SP-95,JIS B2316....
Crafts: Butt, Push System, Simmer
Connection: SW,BW,TR.
Package: Wooden boxes,Wooden pallets,According to customer requirements.
Brand Name: HY
Place of Origin: China (Mainland)
Certification: ISO.UKS.SGS.BV
Application: Chemical, Water, Oil and gas, Electricity
Socket Welding Elbow,Socket Weld Fittings,Socket Weld Coupling,Stainless Steel Socket Weld Fittings
CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com