Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%D3%CD%C6%E1&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })
The usage method of this adhesive is quite similar to that of traditional polyvinyl acetate latex. This product demonstrates excellent properties such as freeze-thaw resistance, aging resistance, strong bonding capability, and a long shelf life.
When using this adhesive, it’s crucial to control the wood's moisture content between 8-15%. If the moisture level is either too high or too low, it may negatively impact the bonding quality. Additionally, ensure the substrate's surface is clean and free from any oils, dust, or impurities. The bonding surfaces need to make full contact for optimal results.
Apply the glue evenly and in the right amount. This adhesive can cure at room temperature or through heating, but the maximum temperature should not exceed 120°C. The curing time depends on the temperature and can be adjusted based on specific conditions. When applying pressure, ensure the pressure is sufficient, evenly distributed, and maintained for over 1.5 hours. After releasing the pressure, allow some time for aging. For the best adhesion, it’s recommended to keep the pressure for 24 hours and then let it age for another 72 hours.
This adhesive can also be mixed with certain resins like urea-formaldehyde resin, phenolic resin, or trimeric polyamine resin to enhance its water resistance and creep resistance.
Hank Sert Rivet,Rose Riveting Nut,Rivet Bush,Hank Bush,Hank Rivet
Dongguan Tiloo Industrial Co., Ltd , https://www.sales-fastener.com