Parcel Thermoplastic Vulcanizate TPV Pellets in Grey for Extrusion, Injection and Blow Molding

  • Model NO.: 6000
  • Plastic Properties After Heated: Thermoplastic Plastics
  • Color: White
  • HS Code: 4002991100
  • Material: TPV
  • Plastic Forming Method: Extrusion
  • Process: Injection, Extrusion, Blow Molding
Pacrel ® TPV 6000
Pacrel ® TPV is a Vulcanised Thermoplastic Elastormer. It is made up of an elastomeric phase (dynamically vulcanised EPDM), which is deeply dispersed in a polyolefinic thermoplastic matrix, whose combination determines a real plasto elastomeric alloy characterised by high performances and extremely easy processability. Its thermoplastic matrix allows Pacrel ® TPV to be processed in an easy and unexpensive way by means of traditional technologies used for thermoplastic materials and to be fully recyclable whereas its elastomeric phase features typically rubber-like specifications such as elastic recovery and softness.
 
Applications: seals and gaskets, hand grips, auto parts, wire and cable sheath/ connector, transportation expansion joint, electric and electronical products and so on.
 
Parcel Thermoplastic Vulcanizate TPV Pellets in Grey for Extrusion, Injection and Blow Molding
 Main specifications:
Wide hardness range, from Shore40A to 95A (50D)
Typical density <0.96 g/cm3
High elastic recovery within a wide temperature range
Excellent resistance to UV aging and ozone
Service temperature ranging from -60 to 135°C
Excellent resistance to several chemical agents
High fatigue resistance
High thermal and electric insulation values
Heat adhesion on polypropylene (PP)
Excellent colorability
 
Parcel Thermoplastic Vulcanizate TPV Pellets in Grey for Extrusion, Injection and Blow Molding
Process: Can be processed through typical thermoplastics technologies, such as injection-molding, extrusion, blow-molding, calendering and over-molding. Normally Pacrel does not require drying before processing, apart from some special grades.
 
Recycling: Can be completely recycled and reused after regrinding.
The user shall always verify that the compound obtained by mixing virgin and reground material is suitable for the specific application and meets the requirements. 
  
Storage: Should be stored in a covered facility and kept away from moisture and heat.

Certifications: 

Parcel Thermoplastic Vulcanizate TPV Pellets in Grey for Extrusion, Injection and Blow Molding
 

Stainless steel pipes are used in a wide range of industries/markets, due to their overall corrosion resistance and good machinability. Pipes are generally considered passageways for liquids, and measured by inside diameter or ID. Some industry examples include marine, chemical & petrochemical, oil & gas etc.


we have stainless steel Seamless Pipe per ASTM A 312 in 304/304L and 316/316L. We supply other stainless grades, including 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel grades are also supplied.

Stainless Steel Pipe

Stainless Steel Pipe,304L Steel Pipe,316L Stainless Steel Pipe,A312 TP316L Pipe,A312 TP304L Steel Pipe

Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , http://www.bd-pipefitting.com