Descriptive characteristics of radial ball bearings

Source: China Bearing Network Time: 2013-02-19

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The radial ball bearing consists of an inner ring, an outer ring and a holding frame with fine balls. The standard Conrad type bearing has various depictions; its deep groove layout can carry radial and axial loads in a free direction; Higher speed use occasions.
In addition to the standard single row deep groove bearings; Timken also supplies special depictions; namely the largest load bearing series and the XLS super large radial bearing series.
Scale scale: 3 mm - 600 mm (0.12 in. - 23.62 in.) Inner diameter depicting characteristics This type of bearing is suitable for use in polluted environments; it ensures a longer service life.
Special coatings provide rated corrosion resistance.
Special seals depicting assistance to maintain adherence to smoothness; barriers to external pollution.
The setting of the snap ring slot simplifies the device process.
A variety of sealing rings and dust cover equipment are available for different alignments; to better protect the internal components of the bearing; to avoid leakage of smoothing agent.
Use radial ball bearings for high speed, high precision applications; such as:
Agricultural auto chemicals general industrial utilities

Recommend to friends comments close window

Bearing related knowledge

The use of NTN bearings must pay attention to the smoothness of rolling mill bearings
NSK bearing inspection and inspection common sense bearing external grinding defects reasons and countermeasures analysis of excavator special bearing correct device approach analysis

This article links to http://
Please indicate the bearing network http://

Previous:Turning bearing vocabulary (1)
Next: The use of the inner ring of the used rolling bearing in the blanking die

Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250.

Features of Steel frame screen:
1.Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better.
2.High strength frame, multiribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screen`s acceptable flow , the intensity and the lifetime.
3.The wedge shaped fastening device, can make the erection of screens more handily and quickly.
4.The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damage. By doing so, the operator can cut down the stop time and reduce the cost.

Oilfield Shale Shaker Screen

Oilfield Shale Shaker Screen,Shale Shaker Screen,Liner Shale Shaker Screen,Oilfield Screen

Shijiazhuang Junyangyuanyu Import & Export Trade Co., Ltd ,