Anti-theft tips

Anti-theft and robbery is a big problem for the New Year. In the words of the common people: the thief will start "robbing the New Year" again, everyone must be careful ...

At the end of the year and the end of the year, many lawbreakers held the "third hand" mentality and frequently extended their "third hand." They are either staring at the shoppers in the mall, or prying off houses, or even robbing ...

Pay attention to anti-robbing single ladies

Case: At 12:00 on January 3, when Ms. Lin walked to the gate of the southeast ceramic city of Diaozhuang, two men who drove a motorcycle robbed her of her bag, which contained more than 2,000 yuan in cash and 1 mobile phone; 17 on the day At 47, Ms. Ling Ling walked to the gate of Huajingyuan Community in Chashan and was robbed of the bag by two men riding a motorcycle. There was more than 1,000 yuan in cash; at 19:33 that day, Ms. Wang Wang While waiting at the bus platform of the Metro Mansion, a pair of gold earrings was robbed by a man.

Reminder: Suspects drive high-powered motorcycles with fake licenses to carry out speeding snatches. The main targets for snatching are goldware, mobile phones, and bags. Therefore, citizens should not expose their shoulder bags or shoulder bags when riding a car. Ladies with exposed shoulder bags when walking should pay attention to carrying them on the side of the sidewalk. When they are robbed, they can hide, but do not overly resist. , So as not to cause greater losses, and then write down the license plate, the characteristics of the criminal and the escape direction, and report to the police in time.

Security lock with anti-theft property

Case: 5 thefts occurred in the city of Jan. 3 in one night: Room 401, Unit E of Jinxiu Garden, Room 301, Unit C, Qingliang New Village; Xilin Changzhou Square Electronics Co., Ltd .; Mitsui Huashan Road Zhenyang Electronics Factory ; Room 502, Ding Unit, North Building, Qishuyan Gongfang. Most thieves steal by climbing a balcony, prying an anti-theft door, or using a long pole to extend into the room from the window.

Reminder: Citizens should increase anti-theft awareness and strengthen preventive measures, such as installing protective barriers, and closing windows in balconies and other places when sleeping at night. When going out, lock all doors and windows, use qualified anti-theft doors, and do a good job of safety protection. When there is no one in the house, citizens should try to store valuables such as cash in banks and other places to reduce stolen losses. Before going to bed at night, do not put your clothes where you can see and hook from the window. Neighbors should take care of each other and report to the police in time when they are suspicious. If the public finds that their home has been stolen, they must never turn over the things in the home, and they should call the police immediately. If you open the door and discover that it was stolen, it is best not to enter the house, protect the scene, and wait at the door to wait for the police. If you see a robber using a brutal method to rob, do not panic, pay attention to the physical characteristics of the robber, such as height, fat and thin, face shape, etc. When the police arrive, they will immediately provide it to the police, and never fight hard with the robbers.

Anti-theft clutch bag in public places

Case: On January 3, Ms. Zhang and her friends tried shoes at a specialty store on West Yanling Road. When they paid for the shoes 15 minutes later, they found that the wallet in the bag slung across the shoulder was missing and lost 3000 yuan in cash , ID card, bank card.

Reminder: When shopping, make sure that the bag is not away from you. When trying on clothes, you can give the bag to your partner or hold it in your hand. Don't let the bag leave your sight. Do not bring too much cash when shopping, so as not to be targeted by thieves, the security of swiping with bank cards is relatively higher. After opening the bag, take the zipper. When it is particularly crowded in discount areas, special price areas, etc., it is best not to join the fun first. The thick curtains in shopping malls and supermarkets also provide opportunities for thieves in winter. The thieves started when the citizens lifted the heavy curtains with their hands. In addition, the public should not deliberately pinch their pockets to see if the wallet is still in a crowded place. Often this action, the thief thinks that you have "goods" in your pocket, and will do everything possible to start with you.

Beware of "black hands" in the process of anti-tracking withdrawals

Case: At noon on October 15 last year, a citizen named Lu withdrew 500,000 yuan from a bank in New Taipei City, and then put a canvas bag full of cash to the front of the passenger's seat and drove straight into Huangli. At 11:35, Lu went to a snack bar to eat. Ten minutes later, Lu Mou came out and found that the glass window of his co-pilot had shattered, and the huge 500,000 yuan placed inside had disappeared. At 11 pm on October 31, the police arrested 11 suspects including Wei Mou.

Reminder: It is best to go with two people when withdrawing large amounts of cash. Do not count the money near the entrance of the business hall. Do not put the loaded bags in the bicycle basket or motorcycle back box. Do not expose the money in public places; Note Whether there are idle staff at the bank's business outlets, pay special attention to suspicious personnel wearing helmets (hats) and sunglasses in the business hall that deliberately cover up facial features or wear inconsistent with the climate, or wandering and wandering and indiscriminately calling mobile phones; pay attention to the safety of withdrawals. After leaving the business hall, pay attention to observe the situation before and after, and pay attention to whether anyone is tracking and peeping, especially suspicious persons who drive motorcycles at the bank entrance or look around, if necessary, walk to the police for help, call the police or quickly leave by taxi; once If they are violated by criminals, they should take timely remedial measures and call out for help in order to attract people's attention and alertness and strive for assistance.

As far as possible remember the characteristics of criminals, such as the gangster ’s height, hairstyle, face shape, accent, escape direction, vehicle color, model, license plate number, etc., to provide effective clues for solving the case; the bulk financial business of the enterprise unit, try to use bank transfer Such as electronic money, or accompanied by male staff. If it is absolutely necessary, the public should try to use the silver card to transfer money, and do not carry large amounts of cash with them.


PCD End Mills

The PCD End Mill is the most productive tool on the market today, It stays in optimal conditions for long tool life.
It can be used for cutting non-ferros metals and non-metallic materials such as Carbon Fiber Reinforced Plastic (CFRP) Glass Fiber Reinforced Plastic  Copper, Brass or Graphite.

Polycrystalline diamond end mills, in Five steps tailor made and in Five Days available.  
OPT company products are  LEAN productionproces, built to produce PCD end mills according to the highest standards.

PCD Milling Cutter type:


PCD End Mill

PCD Ball Nose End Mill

PCD Thread Milling Cutter


 

Flexible in order quantity:

Samples can be provided before mass production, and MOQ can be discussed accordingly.


PRODUCT DETAIL:

pcd end mills

pcd end mills

pcd end mills

pcd end mills

pcd end mills

pcd end mills 6





PRODUCTING PROGRESS:

4product detail-fanyi

PAYMENT AND DELIVERY:

7

PRODUCT EQUIPMENT :

+product equipment

ABOUT US :

We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc., 


We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer , Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

banggong huang jing

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

great service


PCD End Mills

End Mill,End Mill Cutter,Roughing End Mill,Diamond End Mill

OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com