I believe that many people do not understand what Malay paint is. Malay paint was firstly popular abroad. It has been popular in China in the past two years. Some of the more influential owners have chosen Malay paint to decorate the wall, but they are about Malay paint. The relevant knowledge is not as popular as the ordinary latex paint. Today Xiao Bian gave you talk about what we need to know about Malay paint.
First, what is Malay paint?
Malay lacquer is an imported product. The English name stucco, which means mortar, was introduced into the country because its texture pattern is similar to that of a horse galloping horse that was named Malay Lacquer.
Malay paint was once popular in Europe, the United States, Japan and Taiwan, a new type of wall art paint. The paint finish has a stucco effect. Malay lacquer is a kind of sizing coating mixed with attapulgite clay, acrylic emulsion, etc. It is a type of coating that produces various kinds of texture by scraping operation on various types of scraping tools. Its artistic effect is obvious. With smooth touch, it is a representative of a new type of art paint.
Second, Malay paint construction process
1, the grass-roots processing, according to the standard of high-grade interior wall paint to do a good putty bottom, remember: must use a good interior wall putty, because Malay paint is a high-grade art paint, is not a self-sealing paint primer, To ensure the compactness and solidity of the substrate. After brushing a good putty sanding with No. 350 sandpaper (to have a higher level of flatness).
2. The next step in the implementation of the Malay paint is to use a special Malay lacquer, knife, and knife to scrape similar positive (long) square patterns on the wall, with no overlap between each pattern. , and every square angle is as different as possible, staggered. It is best to leave half the pattern size gap between the pattern and the pattern.
3. After the first pass, the second most important process of Malay paint is to be carried out. Also, Malay paints a knife to fill in the gap left by the first construction. Of course, it is not a simple supplement. Instead, it must be staggered with the corners of the pattern left by the first construction.
4, after the completion of the second process, you must check whether there are gaps in the above area. If there is any frizzy place, lightly grind it with No. 500 sandpaper. A good Malay paint can be used to create a glossy finish. Just on the third Malay lacquer, according to the original method in the above knife scraping, edge scraping and polishing, this is a relatively high grade Malay paint.
5, the final polishing: After the completion of the three batches of scraping has been completed Malay lacquer pattern effect, with a stainless steel knife to adjust the angle scraping and polishing until the wall surface as marble finish.
Third, Malay paint construction considerations
1, the paint should be used before the label, and carefully stir evenly, after the use of slurry cover cover strict.
2. The storage and construction of paints should conform to the temperature conditions of the new product specification, ingots, and should normally be above 5°C. If the paint is frozen during storage and storage, it should be allowed to thaw naturally in rooms with higher temperatures, and it must not be baked with fire. . After thawing, the paint was confirmed to have no qualitative change before it could be used.
3, paint color is best done by the production or dealer. To ensure the consistency of the batch of paint color. If you need to colorize the interview at the construction site, you must use the colorant that is provided or assigned by the manufacturer. According to use requirements and proportions. Assigned by someone.
4. Some polyurethane coatings contain more free toluene diisocyanate. The yellowing of the latex paint will occur during the volatilization process of the brushing. It should be avoided that the polyurethane and latex paints are applied at the same time. It is best to completely dry the fine brushing latex paint in the polyurethane paint.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Decoration construction knowledge
Carved Panel Mouldings Corners have Muti-functional style and special style.
1. Muti-functional style Carved Panel Mouldings corners can be used to match with Carved Panel Mouldings which is the same or approximative size, which can enhance the effect of the decoration.
2. Some Panel mouldings have specified Carved Panel Mouldings Corners, for examples, PU panel moulding CP258, we have developed four different designs corners to match this Foam moulding, the item no of PU corner is CP258-11, CP258-12, CP258-13, CP258-14, each corner matchs the mouldings perfectly.
Advantages of Carved Panel Mouldings Corners :
1. Elegant European style
2. Many models to choose from
3. Suitable for both DIY and construction projects
4. Superior to Gypsum moldings
5. Light weight, easy to transport and install
6. Elaborate patterns
7. Beautiful Matching
8. Labor efficient
Carved Panel Mouldings Corners
Corners For Wall Corner,Multi Functional Style Corners,Corners For Mouldings,Carved Panel Mouldings Corners,Crown Corners,Panel Moldings Corners
Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com