After the general renovation of the new house, inspection of the house is also a matter of great importance. Because if a problem arises in the inspection of the house, the interests of all of us will certainly be detrimental, so every aspect cannot be ignored. Today Xiao Bian introduced new home inspection procedures and the relevant knowledge of how to inspect homes.
First, the new home inspection steps
The first step is to use a hammer to check if there is any hollowing on the wall. Because hollowing is hidden, it is often overlooked. Once the empty drum phenomenon was not discovered and dealt with immediately, it would be very troublesome for the renovation process. After a long period of hollowing on the wall, cracking and peeling will occur. Therefore, the inspection must be carefully observed, the walls must be checked one by one.
The second step: circuit acceptance is a non-negligible part of the inspection process . Generally, we will bring a traditional electric pen or light bulb to test the circuit, but the traditional way can only reflect whether the circuit is connected. However, we must check if there is any wrong connection between the ground line, the zero fire line, and leakage protection. Professional inspection plugs are checked to ensure standard circuit acceptance.
The third step: Water pipeline acceptance refers to the inspection of the drainage pipeline. A large container is used to fill the water when inspecting the house. When water is ingested, it is important to observe whether the water pressure of the water head is unobstructed. If the water pressure is insufficient, it will result in insufficient supply. Immediately afterwards, use the connected water to pour into the toilet, wash the washstand, drain the sink, and drain the floor. Check that the drainage will not be blocked.
Step 4: Check the doors and windows and glass sealant. Check whether the doors and windows will be open and closed, there is no phenomenon of Karman. But also check whether the locks of the windows and doors are consistent, there is no glass sealant evenly on the window, the window frame and the wall with no leveling, sealing is not strict, to avoid the phenomenon of water leakage in the rainy days.
Step 5: Check whether the kitchen exhaust air is unobstructed. You can use a piece of waste paper around the flue mouth to use a lighter to ignite and observe the ventilation capacity of the flue exhaust vent.
Step 6: Check the wall hole. Observe whether the wall has air conditioning holes, extraction hood exhaust holes, or bathroom ventilation holes, etc., and observe whether the position of the hole is reasonable. If hidden, it will cause the ceiling position to be too low.
Step 7: Record. The experimental room also needs to record the following sets of data: 1. Water distance. 2, putty putty position. 3, bearing wall and non-load bearing wall location. 4, insulation wall location.
Summary: The above is the small house for everyone to introduce the new house inspection procedures and how to submit the house when the relevant knowledge of inspection, hoping to bring help to your decoration! If you buy a new house later, we must correctly conduct the inspection work. For more related knowledge, try this site!
Home inspection steps
Furniture Metal Bed,Metal Bed Modern ,Metal Bed With Cushion,Metal Bed
FOSHAN CITY LESHUN RONGHUI FURNITURE CO.LTD , https://www.sdwinfurniture.com