Six Decoration Magic Efforts to Eliminate the Disadvantages of Second-hand Housing

More and more people, especially young people, have turned their eyes to second-hand housing. While the second-hand housing has a considerable advantage, such as a superior geographical location, making travel more convenient; complete supporting facilities to make life more convenient; relatively low prices, reduce the financial pressure. Second-hand housing can also have certain disadvantages, that is, most of the old houses, old units, in the decoration and the future of living may encounter many problems. Therefore, I hereby suggest that in the renovation of second-hand housing, if you can do the following work, you will effectively eliminate the unfavorable factors in second-hand housing.


Green fir decoration     Bingyuan Decoration

First, understand the structure of the house can not be arbitrarily removed

The structure of the previous house is not always very good, so when someone buys a second-hand house, they are already planning to modify the structure of the house, where to add a porch, get through a wall, etc., because the multi-storey houses in the city are mostly In the brick-concrete structure, the wall is firstly a seismically load-bearing member, followed by a partitioning member. If the load-bearing wall is interrupted in order to enlarge the space, the load-bearing capacity and the anti-seismic capacity of the wall components will be weakened, leaving serious hidden dangers. Therefore, it may cause various troubles to demolish the structure at will, such as wall cracking, collapse, and circuit failure. problem.

Second, hydropower reform is deadly

Because the previous material is not currently advanced, but also coupled with a long time, second-hand housing widespread circuit distribution is simple, wire aging, illegal wiring and other signs, is not in line with the power needs of contemporary households, so in the renovation must be completely transformed, Rewire. Because the aluminum wire was used in the past, it is necessary to replace it with the copper wire we use today, and we must use PVC insulated wire protection pipe. For the air-conditioning and other high-power appliances, the circuit must do a separate circuit. Before the renovation, we must carefully check whether the original waterway and gas pipeline are rusted and aging. The water pipes should be replaced with copper pipes or PPR pipes. For dangerous pipelines such as gas pipelines, it is best to ask a professional to perform inspections.

Third, it is very important to do a good waterproof

Do not think that second-hand housing has been lived in front of the owners, the water will not be a problem, in fact, often people will move into the second-hand housing because the leakage of the owners of the lower level of complaints. Because the age of the house is too long or the original waterproof is not done well, many of the second-hand housing bathroom space leaks. It is recommended that before moving into a second-hand house, it is best to do a closed water test in the bathroom space to check how well the previous water repellent treatment is done. Before testing, it is best to greet the neighbors downstairs. In case of real leakage, you can also get the understanding and cooperation of neighbors. If there is a problem, be sure to re-waterproof before you start tiling.

Fourth, paint the wall, the bottom is the key

The walls of the old house will be cracked and peeled. Therefore, when decorating the wall, be sure to pay attention to the basic treatment. Generally, a good decoration company will apply the interface agent and interface agent after leveling the wall. With the role of moisture, but also can play a role in the protection of latex paint, followed by putty, putty paste to use waterproof putty, putty scraping generally have to be three times, and finally brush latex paint. If the wall is to be colored, paint it accordingly.

Fifth, increase the essential switch and socket

Some friends simply found out after the move, found that many electrical appliances can not find outlets, had no choice but to buy some more activity outlets, but too many lines tangled together make people look upset. In modern life, more and more home appliances are used, and the demand for outlets is also increasing. It is often difficult to achieve the current use requirements for the design of outlets in old houses. Therefore, you may wish to reserve more outlets for your future use.

VI. Do a good job of disinfection to maintain indoor air circulation

During the entire process of renovation, especially after applying glue and brushing paint, it is necessary to open the window diligently to keep the air in the room. If there is no window in the bathroom, open the exhaust fan. The decoration process should be thoroughly disinfected on a regular basis, and can be sprayed with 3% lyosol, 1%-3% bleach water, or 3% peroxy acetic acid solution. Close doors and windows for 1 hour after spraying.

In addition, it is recommended that you do not immediately stay after the renovation, if the conditions permit, it is best to open the windows every day, to maintain indoor ventilation, can make formaldehyde and other toxic gases quickly evaporate. It is advisable that the room be completely ventilated after 3-6 months.

Second-hand House Renovation Second-hand House Restaurant Renovation Socket Paint House Renovation Interior Decorating Window Toilet Tile Toilet Door Bathroom Tile Color Toilet Waterproof Price Bathroom Design Toilet Waterproof Toilet Leaking Tile Price Tile Tile Adhesive

Micro-electric motor brush life expectancy shorter than the large-scale electrical machinery, but the use of household appliances is shorter, therefore, a group generally can use the brush a few years in the life of electrical brush need to be replaced during the examples of many . 

Material from the brush of a general can select a low friction coefficient and contact voltage drop of larger graphite electric brush, resin binder for the high resistance of natural graphite brush can be used for the poor motor. In addition, more abrasive strong carbon-graphite brush is mainly used mica sudden ultra-small motor.

Micro Motor Carbon Brush

Micro Motor Carbon Brush Set,Micro Motor Carbon Brush,Electric Micro Motor Carbon Brush,Dc Micro Motor Carbon Brush,High Speed Micro Motor Carbon Brush

Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com