Fixed ball valve opening and closing process

The fixed ball valve is equipped with a floating valve seat. After the medium pressure, the valve seat moves and the sealing ring is pressed against the ball to ensure the sealing. Bearings are usually mounted on the upper and lower shafts of the ball, and the operating torque is small, suitable for high pressure and large diameter valves.
The fixed ball valve is equipped with a floating valve seat. After the medium pressure, the valve seat moves and the sealing ring is pressed against the ball to ensure the sealing. Bearings are usually mounted on the upper and lower shafts of the ball, and the operating torque is small, suitable for high pressure and large diameter valves. In order to reduce the operating torque of the ball valve and increase the reliability of the seal, oil seal ball valves have appeared in recent years. Special lubricants are injected between the sealing surfaces to form a layer of oil film, which enhances the sealing performance and reduces the operating torque. , It is more suitable for high pressure and large diameter ball valve.
First, open the process
1. In the closed position, the ball is mechanically pressed by the valve stem and pressed against the valve seat.
2. When the handwheel is turned counterclockwise, the valve stem moves in the opposite direction, and the bottom angular plane releases the ball from the valve seat. 3. The valve stem continues to lift and interacts with the guide pin in the spiral groove of the valve stem so that the ball begins to rotate without friction. 4. Until the fully open position, the stem is raised to the extreme position and the sphere rotates to the fully open position.
Second, close the process
1. When closed, rotate the handwheel clockwise and the stem begins to lower and the ball moves away from the seat.
2, continue to rotate the hand wheel, the stem is embedded in the guide groove on the spiral groove, so that the valve stem and the ball simultaneously rotate 90 °.
3. When the ball is about to close, the ball has rotated 90° without contact with the valve seat.
4. In the last few rotations of the handwheel, the angular plane at the bottom of the valve stem is mechanically wedged against the ball so that it presses tightly against the valve seat to achieve complete sealing.

Plain MDF Board is mainly used for laminate floor, door sheet, partition, furniture,  decoration of indoor&outdoor, office and home furniture, sould equipment, inside decoration of the car, antistatic floor of computer room, panel, security door, wall board etc, and also used for the package and the basic material of laminate Wood Flooring .

Plain MDF Board is easily for coating finishing, every coating, oil paint are also on the surface of Plain  MDF , is the fist choice as the basic material of painting effects.Plain MDF is one kind of beautiful material of decoration. Smooth and flat surface, fine texture, steady property. All kinds of venner, gummed paper, light metal plate, melamine paper etc, is also can on the surface of the Plain Mdf . Plain MDF is made from acoustical board after drilling, is used in construction decorative progress, such as meeting room, displaying room, office etc. And we have Outdoor Plain MDF Walls.

LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Plywood , venner, MDF Board , Particle board, Door skin , Blockboard , Finger joint board, OSB , paper, Steel etc.

Plain MDF Details:

size:1220*2440MM 1830*3660MM 1830*2440MM 915&610*3660MM 1220*2800MM 1525*2440MM

THICKNESS:2MM-35MM

MATERIAL:POPLAR, COMBINE, PINE

GLUE:E0, E1, E2, FIRE-PROOF

CERTIFICATION:CARB, FSC, CE, SON CAP

plain mdf

Plain Mdf

Plain MDF,Plain MDF Board,Outdoor Plain MDF Walls,Plain Raw MDF

Luli Group Co.,Ltd. , https://www.cnluli.com