[China Aluminum Network] There are two common methods for installing door stoppers: one is mounted on the floor, and the other is attached to the wall or baseboard. Nowadays, magnetic door stoppers are widely used due to their convenience and effectiveness. In this guide, we'll walk you through the detailed installation process of a floor-mounted magnetic door stopper.
First, it's essential to confirm with the homeowner whether the door stopper will be installed on the floor or the wall. Since this is a bathroom, the owner has decided that the door stopper will be directly placed on the floor tile, leaving space behind the door. The worker and the homeowner discuss and finalize the exact installation location. The master installer measures the available space behind the door, ensuring it meets the requirements while also respecting the owner’s preferences.
Next, open the door to the desired position and test the magnetic function. Check if the suction distance is appropriate and if the door closes smoothly without any resistance. Once the position is set, the door is opened to evaluate the actual operation. This includes checking whether the door stopper is slightly in or out and confirming the correct angle at which the door opens.
After determining the ideal position, the next step is to mark the spot on the floor tile. Using a pencil, the master installer draws lines to indicate where the door stopper will be placed. This helps in aligning the door properly during installation.
Then, the installer makes a second marking to ensure accuracy. By positioning the door twice and aligning the marks in a straight line, the angle of the door opening can be precisely determined. This step is crucial for a smooth and functional installation.
Following this, the installer uses an electric drill to create holes in the floor tiles. The tiles are already securely laid by the mason, so drilling is straightforward. Only one hole is needed for the fixed end of the door stopper.
Once the holes are ready, the fixed end of the door stopper is assembled and secured. The upper screw is tightened, and the fixed end is fastened to the floor using an inner corner wrench. The door stopper consists of two parts: the fixed end and the door end. The fixed end must be properly tightened before installation.
After the fixed end is in place, the door end is installed on the door itself. The process involves opening the door to its maximum position, locating the exact spot on the door, and securing it with a screw. This ensures that the door stopper works effectively and maintains proper alignment.
Finally, fine-tune the angle of the fixed end to ensure a perfect fit between the door and the stopper. Once everything is aligned, fully tighten the screws. Although small, a door stopper plays a significant role in preventing doors from slamming into walls and causing damage. It enhances both safety and comfort in any home. A properly installed door stopper not only improves functionality but also contributes to the overall quality of your living space. Therefore, attention to detail during installation is essential to ensure long-lasting performance and user satisfaction.
high accuracy laser distance sensor, laser sensor for distance measure, phase distance measure sensor
CHENGDU MESKERNEL INTEGRATED TECHNOLOGY CO.,LTD , https://www.meskernel.com