Screw air compressors have become the mainstream products in the air compressor industry. More and more enterprises choose to use screw air compressors. Like traditional piston machines, screw air compressors must be regularly maintained during use. Its maintenance is mainly reflected in the maintenance of the air filter, the replacement of the filter and the maintenance of the fine separator and cooler. The following is a detailed introduction made by Shaanxi Langkun air compressor technicians.
The air filter is a device for filtering impurities in the air, so that the filtered clean air can enter the screw air compressor. If the air filter is clogged or damaged, a large amount of impurities will enter the air compressor, which will affect the fine oil separation. The service life of the core also accelerates the wear of the bearing and reduces the efficiency of the air compressor.
Therefore, it is best to maintain the air filter once a week, use compressed air to blow off the impurities on the air filter, and use a clean cloth to wipe the dirt on the inner wall.
When cleaning or replacing the air filter, pay attention to the correspondence of each component to prevent foreign matter from entering. When installing the air filter, pay attention to the front and inner seal.
Usually, the air filter should be replaced when it is used for more than one thousand hours, especially for some places with poor use environment, such as mines, cotton mills, etc., to shorten the time for replacing the air filter.
In addition to the above points, you should always check the integrity of the telescopic tube during the process of using the screw air compressor. If it is found to be loose and leaking, it should be handled in time.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Expanded Metal is an extraordinarily versatile material - one with thousands of uses. It comes in three basic types, and it has four primary areas of application.
Basic types are raised (or standard), flattened and architectural (or decorative) meshes. The major areas of use are for enclosure, protection, support and decoration.
Expanded metal products are produced from solid sheets or plates of carbon, galvanized and stainless steel, as well as aluminum and a variety of alloys of copper, nickel, silver, titanium and other metals.
Decorative Expanded Metal: Specially designed expanded metal for use in architectural and decorative applications. These design can be used to provide privacy and to control light and air while allowing visibility. Sun screens, room dividers, and building facades are only a few of the possible design possibilities. Available in carbon steel, aluminum and other alloys in a wide range of patterns and gauges. Most of these patterns are produced on a special order basis only.
Package
1.On pallet with waterproof cloth,the biggest width is 1500mm
2.In wooden case with waterproof paper
3.In carton box
4.In roll with woven bag,the biggest width is 3000mm
5.In bulk or In bundle
Feature
1.Expanded metal premise free flow of light, heat, sound and air.
2.effective alternative cost .
3.Available in a variety of mesh configurations including diamond, square,
round, hexagonalplus architectural and decorative patterns.
4.it is easily fabricated, finished, installed and formed.
Expanded Aluminum Mesh,Aluminum Expanded Metal Mesh,Decorative Expanded Metal Mesh,Small Hole Expanded Metal Mesh
Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com