The electric sleeve regulating valve is one of the large family of valves. Today, the small series of Wanshou Hardware Machine Network introduces its working principle and usage characteristics:
Working power: AC22V 380V and other voltage levels. This type of valve should generally be installed horizontally in the pipeline.
By receiving the signal of the industrial automation control system (such as: 4~20mA) to drive the valve to change the cross-sectional area between the valve core and the valve seat to control the flow, temperature, pressure and other process parameters of the pipeline medium. Implement automatic adjustment functions.
The direct acting type is also called spring loaded type, and its structure has elastic elements such as: spring, bellows, bellows type warm pack, etc., which utilizes the principle of balance between elastic force and feedback signal.
The indirect acting regulating valve adds a pilot (pilot valve) which amplifies the feedback signal and then drives the main valve flap to move the valve opening to change the valve opening.
In the case of a pressure regulating valve, the feedback signal is the outlet pressure of the valve and is introduced into the actuator through the signal tube.
In the case of a flow regulating valve, there is an orifice plate (or other resistance device) at the outlet of the valve to extract the differential pressure signal from both ends of the orifice plate into the actuator.
In the case of a temperature regulating valve, the outlet of the valve has a temperature sensor (or a warm pack) that drives the actuator through thermal expansion and contraction of the medium in the temperature sensor.
Concerned about surprises
Label: Working principle and use characteristics of electric sleeve regulating valve
Previous: What are the main features of steel structure construction? Next: What is the difference between high quality spiral tube and inferior spiral tube?
Swaco Shaker Screen models: Swaco mongoose/meerkatpt shaker screen, Swaco MD-2/MD-3 Shaker screen, Swaco Mamut Shaker Screen,Swaco ALS II Shaker Screen, Swaco BEM-3 Shaker Screen.
Swaco Shaker Screen types also includings steel frame shaker screen and composite frame shaker screen.
1). Steel frame shaker screen main feature as follows:
- These products screen panels are constructed with two or three 304 or 316 stainless steel wire cloth layers with s steel backing plate and steel frame combined together. Because of different mesh size and hole size, get an better filtering effect.
- The bottom high strength steel frame, supporting bar with the moderate tension screen cloth, combined together, infinitely enhance the screen intensity and endurance, get an better filtering effective. Mesh sizes ranging from 20to 325. The whole cloth is divided into independent small surfaces, prevent the part excessive expansion damaged, with a special rubber plug together to repair damage, can save the time to replace the screen, Increase the efficiency and reduce the cost.
- High strength plastic frame and moderate tension screen cloth that from a reliable whole, greatly enhance the tolerable.
- The screen is divided into several independent small cloths to pervent excessive expansion of local damage.At the same time, With a special rubber plug to repair damage, it can save time and reduce use-cost.
- Rapid wedge tensioning devices make screen installation more convenient, and save the time of machine half for changing.
- Excellent polyurethane material frame enhance corrosion resistance, have a good stock absorption and ectend working life of screen
Swaco Shaker Screen
Swaco Shaker Screen,Swaco Oil Shale Shaker Screen,Swaco Shale Shaker Screen,Swaco Oil Shaker Screen
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com