How to identify solid wood wardrobes and slab wardrobes

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

definition

Retrieval method determines the value

A solid wood wardrobe refers to a wardrobe made of natural wood. The surface of such a wardrobe can generally see the beautiful pattern of wood. Wardrobe manufacturers generally pay attention to the varnish or matt lacquer for the solid wood wardrobe to express the natural color of the wood.

One is a pure solid wood wardrobe. That is to say, all the materials of the wardrobe are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of pure solid wood, and no other type of artificial board is used. Pure solid wood wardrobes have high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tightly controlled, the phenomenon of cracking and loosening of joints will occur, and the whole set of wardrobes will be deformed and will not be used.

The other is an imitation wood wardrobe. The so-called imitation wood wardrobe, from the appearance of the solid wood wardrobe, the natural texture, feel and color of the wood are exactly the same as the solid wood wardrobe, but in fact, the wardrobe of solid wood and wood-based panels.

A panel wardrobe is a wardrobe made of a medium-density fiberboard or a particle board for surface veneering. A large part of this wardrobe is a wood grain simulation wardrobe. The veneer of some panel wardrobes currently on the market is more and more realistic, the gloss and feel are good, and the products with fine craftsmanship are also very expensive.

Distinguish

Wood grain and knot identification

How to overcome the shortcomings in solid wood and panel wardrobes? The easiest way is to buy products from famous manufacturers. The products of excellent manufacturers often carry out strict drying treatment on the solid wood wardrobe, so that the moisture content of the wood is kept within a limited range. Such a wardrobe is not easy to be deformed, and the after-sales service is guaranteed. In addition, the famous manufacturers use plate materials that meet the environmental protection requirements for the panel wardrobes, and most of the veneers are well treated. The good edge sealing makes the gas diffusion of the panel wardrobe reach the lowest level, which does not cause any damage to the human body. Consumers should pay attention when purchasing. You can open the door or drawer to smell it. If there is a strong irritating smell, most of the formaldehyde is too high and should not be purchased.

The quality of the process, the price of solid wood directly affects the price of solid wood wardrobes. Therefore, to choose a solid wood wardrobe, the first thing to look at is the material. For example, mahogany, the price of different tree species is different. The higher the grade of solid wood used, the better the process, and the higher the price of the wardrobe. Generally speaking, in terms of price, the price of the same wooden, all-solid wood wardrobe is much higher than the price of imitation wood and wood-based panels combined with wardrobes. However, the price of some well-made and novel style panel wardrobes may far exceed the price of rough wood wardrobes.

How to identify whether a door panel or partition is made of solid wood? The key lies in the wood grain and the knot, which is the method disclosed by the industry to identify whether it is a piece of solid wood. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. In addition, the identification panel wardrobe also has a small trick, which is to carefully observe the hinge groove and the eye-opening, and expose the internal structure, so it can be seen whether the particle board or the medium density board is used.

First Grade Silicon Carbide

First Grade Silicon Carbide,Silicon Carbide For Abrasive,Silicon Carbide For Refractories,Metallurgical Grade Black Silicon Carbide

ningxia hexing carbon based materials co.ltd , http://www.hexingsicmanufacture.com