When many tea lovers first came in contact with tea, it was unbelievable to see so many utensils immediately. The tea drain was something we were familiar with. There was a lot of things to be discovered in just one leak detection. Through the process, learn these and you can have better tea. The following small series for everyone to introduce the tea should choose what material ?
According to Lu Yu's "Tea Sutra" "Four Instruments", together with statistics on attachments, tea, tea, tea, and tea storage, there are 29 pieces. It can be seen that the development of tea sets in the Tang Dynasty has been very impressive. In the "Tea Sutra," the tea was called a water bladder when it leaked.
The practicality of tea-leaching sometimes adds trouble to the tea, and improper use can also affect the taste of the tea soup. Therefore, there has been early discussion about whether or not to use a tea leak.
The advantage of not using a tea break is to present the real face of the tea soup in a convenient and completely authentic manner. Some tea breaks are complete and the tea is rigorous and clean. It is normal to not use a tea break or before the brewing process. A few blister use a tea break, but do not use when the back tea breaks down.
However, the shortcomings are also obvious, because most Pu'er teas are very difficult to avoid the occurrence of fine-breaking during the pressing or tea-brewing process. Generally, the gap between the water in the bowl or teapot is not sufficient to block these broken tea or impurities, which affects both the beauty and the taste.
What should be selected for tea drain
1, metal material
This kind of tea leak mainly includes pure silver and stainless steel. The sterling silver is easier to be oxidized, and odd-working furniture Xiao Bian feels that daily use is rare, and the stainless steel tea leak should be the earliest popular tea leak.
Advantages: durable, affordable and affordable.
Disadvantages: First, the use of a long time is more difficult to avoid rust; Second, the metal flavor may have a slight impact on the tea; Third, the network leak is not fine enough, usually in the bottom of the tea soup can still be found in the case of small particles.
2, animal and vegetable materials
This kind of tea leaks common gourd tea in the market, and even has teaspouts made from conch shells.
Advantages: The original ecological green.
Disadvantages: easy to smell, not durable, easy to accumulate tea scale is not easy to clean.
3, ceramic
Ceramic tea leaks are more common in the market today.
Advantages: Net leakage is slim, durable and easy to clean.
Disadvantages: It is easy to accumulate tea dirt after being used for a long time. Pottery is inevitably adsorbed, and it absorbs some tea taste. Different tea products may have a slight influence on each other.
4, purple sand material
Zisha tea is currently on the market there have been some exquisite materials used to produce exquisite materials. Zisha tea leaks have many similarities with ordinary tea tea leaks, but Zisha tea leaks can be cultivated and can be used as well as teapots and purple tea cups. As long as they are cleaned after use, there will be more leaks in the teapots. pleasure.
Advantages: With appreciation and value-added, it has artistic and ornamental value.
Disadvantages: But the teapot is generally not suitable for testing the brewing of tea products. After all, some of the purple tea has the effect of adsorbing tea and tea. It may have a slight effect on tea products.
5, porcelain
Porcelain tea dripping from the general practicality to art appreciation, has developed into blue and white flowers, pastels, kiln, kiln, celadon, and so on, giving the tea drain more fun.
Advantages: easy to clean, fine mesh, does not affect the aroma of tea, filtered soup will be more transparent and bright.
Do you drink tea with a tea leak? Xiao Bian thinks it's really convenient to have tea-drinking tea, and what kind of material should be chosen is also worth paying attention to.
Aluminum Alloy Extrusion Profile Y Tube
YF offers A6061,A6063 and other series aluminum alloy extrusion profile Y tubes for printer and copier. The extrusion Aluminum Tubing can be shaped in almost any way desired. This provides unique construction and design possibilities, which is a good foundation for creating products that contribute to sustainable development.
1.Application: For printer and copier
2.Material: A6063, A6061, A3003 and other series alu alloy
3.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
4.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
Straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
5. STANDARD PACKING:Wooden case/carton
6. Trade Terms
1) Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2) Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3) Trade Term can be chosen depending on your requirements.
4) FOB Port: Shanghai
Extrusion Profile Y Tube,Aluminum Extrusions,Extrusion Aluminum Pipe Tube,Aluminium Profile Tube
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com