"China New Materials Industry Annual Development Report (2014)" published

Abstract The "China New Materials Industry Annual Development Report (2014)" prepared by the Department of Raw Materials Industry of the Ministry of Industry and Information Technology has been published by the Electronic Industry Press. This book is based on the work of the new materials industry in the first two years, from development, industry, region, enterprise, base, special...
The "China New Materials Industry Annual Development Report (2014)" prepared by the Department of Raw Materials Industry of the Ministry of Industry and Information Technology has been published by the Electronic Industry Press. Based on the work of the new materials industry in the first two years, this book traces and analyzes the situation of China's new materials industry in 2013 from different dimensions such as development, industry, region, enterprise, base and special topic.

The book is divided into six parts. The development section introduces the development of new materials industry at home and abroad in 2013, and looks forward to the development trend of China's new materials industry in 2014. The industry section introduces the latest developments in the development of six key areas of special metal functional materials, high-end metal structural materials, advanced polymer materials, new inorganic non-metallic materials, high-performance fibers and composite materials, and cutting-edge new materials. The regional section introduces the latest developments in new materials industries in various provinces, autonomous regions, and municipalities directly under the Central Government. Five key new materials companies were selected for introduction in the enterprise section. The base article introduces the development of representative new material bases. The feature section introduces technological innovations in the field of new materials and the dynamics of graphene technology.

Gutter Cold Roll Forming Machine

 

The components of Gutter Cold Roll Forming Machine: uncoiler, the feed leading table, the main machine, the formation cutting device, hydraulic system, control system and the product bracket.

The technical of gutter cold roll forming machine:

(1) Manual decoiler 
Un-powered; Single head; 
Max. Capacity: 5000kg; 
Coil inner-diameter: 508mm 
(2) Roll-Forming M/C: 
Roller Material: 45# steel 
Voltage: 380V/50Hz

(3) Cutting Mechanism 
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products. 
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine. 
Stop to cut, Post cut cutting length tolerance: ± 2mm 
Cutting tool material: GCr12 with quenched treatment 60-62° C 

(4) Hydraulic System 
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job. 
Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves. 
(5) Computer control cabinet: 
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted 
Computed mode has two modes: Automatic and manual one. 
(6) Counter: 
One counter gauges length, pulses, and decides length 
(7) Output table 
It used to load the forming plate

 

Description of gutter cold roll forming machine:

Thickness of material: 0.3-0.8mm

Main structure:300H steel

Wall plate: 16mm

Electric motor power: 4KW

Diameter of shaft: 52mm

Roller: 15rows

Forming speed: 12-15m/min

Material of Rollers: Cr12

Cutting type: Hydraulic shearing

Motor: 380V, 50HZ/3 phase

Hydraulic motor: 3KW

Size of machine: 6.5m*0.6m*1.2m

Warranty: 12 months limited warranty

Delivery: 30 days after receipt of advance payment

Package: Plastic packing and nude in the container

Payment Term: T/T, L/C, Trade assurance

25

FAQ:

1. Q: Are you a manufacturer?

A:Yes, we are manufacture with Roll Forming Machine factory.

 

2. Q: How should I do if I would like to order my target machine?

 A: Just send us your design drawing if you have. Or tell us your design idea. We arrange our engineer to drawing it for your confirmation.

3. Can you use other brand of spare parts for me if i want?

A: No problem if you want to pay the money.

 


Gutter Cold Roll Forming Machine

Gutter Cold Roll Forming Machine,Small Gutter Cold Roll Forming Machine,Gutter Cold Rolled Forming Machine,Cold Roll Forming Gutter Machine

Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , https://www.zmsteels.com