ã€China Aluminum Industry Network】 The aluminum rods need attention in the production of aluminum rods as follows:
1. First of all, according to the aluminum production schedule and the actual situation of the aluminum extrusion die, install the appropriate length, the material is correct, the surface is smooth without grooves, quality (crystallization, composition, density, no over-burning) guaranteed aluminum Baton;
2. Pay attention to the identification and spacing of different aluminum rods;
3, pay attention to the furnace position and chain width;
4, note that they are not close to each other (with angle iron resistance, not with high temperature easy to soften the aluminum) to prevent the plug furnace;
5. Pay attention to the fact that the aluminum rod does not loosen and fall during handling and charging operation to prevent personal injury and equipment accidents;
6, often check the chain, pins, runners, up columns and other equipment, a solid situation;
7. Regularly check the actual temperature of the aluminum rod, the data of the instrument value (not exceeding 560 degrees), and properly cool down when the shutdown time is long (below 520 degrees);
8. Always check the operation of the spray gun, circulation fan operation, cooling water (water pump) and other equipment is in good condition.
we produce ferro barium silicon 10000mt/year,we export the material to india,japan,korea,Russia,Europe,America ect.
specification:ba:30%min si:50%min Al:2%max C:1%max s:0.05%max P:0.05%max
ba:28%min si:50%min Al:2%max C:1%max s:0.05%max P:0.05%max
Silicon Barium 30/50,Ferro Silicon Barium,Silicon Calcium Barium,Silicon Barium Lump
Shizuishan Ketong Metallurgy Industry And Trade Co., Ltd. , https://www.ketongmetallurgy.com