The solid wood doors are made of natural wood or solid wood glulam of the forest. Most of the precious woods selected are precious woods such as cherry wood, walnut wood, and teak wood. The solid wood doors made of expensive materials are also very "expensive" and require good maintenance. So how to maintain the solid wood door it? Learn to maintain the solid wood door and let the home wood door "longevity"!
How to maintain the solid wood door
1. When removing the stains on the surface of the solid wood door, use a soft cotton cloth to clean it, and easily scratch the surface with a hard part. When the stain is too heavy, use a neutral detergent toothpaste or a special cleaning agent for furniture. After the stain is removed, wipe it dry. Do not rinse with water.
2. Note that the rag soaked with neutral reagents or water should not be placed on the surface of the solid wood door for a long time, otherwise it will immerse the surface to discolor or peel the surface finish material.
3, pay attention to the corners of solid wood doors do not rub too much, otherwise it will cause angular paint off.
4, pay attention to solid wood doors can not have strong acid or alkali chemicals invasion, otherwise it will easily lead to paint loss or even wood decay.
5. The face lock is an active accessory and should be tightened immediately when the looseness occurs. The sound of the hinge position should be promptly noticed. When the lock is open, it is not flexible to add the appropriate amount of pencil core to the keyhole. Do not casually fill the oil.
6, due to the characteristics of wood shrinkage and swelling, in the case of large differences in temperature and humidity, such as a slight cracking or shrinkage, this is a normal natural phenomenon, with the seasonal changes this phenomenon will disappear naturally.
7, in order to maintain the solid color of solid wood doors, should be regularly waxed for its maintenance.
Solid wood door use matters needing attention
Before installation, due to size measurement errors, solid wood doors need to be trimmed, or slight cracking, shrinkage, deformation, etc. during the use process. Products that must be trimmed must be processed or approved by the distributor. Otherwise, dealers and solid wood door manufacturers do not undertake any warranty. responsibility.
To prevent the door from hitting the wall when the door is opened or closed, it is recommended to install the door stopper under the back of the door in time. When using the solid wood door normally, avoid hanging heavy objects on the door or let children hang on the door to play, so as not to shorten the service life; Do not use too much force or open the angle too much, this will not only damage the solid wood door, in serious cases will hurt the person.
The opening and closing door must not be subjected to excessive force and impact for a long time, and it must not be exposed to strong direct sunlight for a long time. This will cause the paint to discolor and age or peel; when the solid wood door is splashed with water, wipe it clean with a clean cloth to avoid local expansion. Do not use too much force to avoid scratching the paint.
Should not be in the half-open state for a long time, and it is easy to loosen the impact on the hinge. For more solid wood door maintenance knowledge, please pay attention to this site information.
More exciting recommendations:
[steel door maintenance] What are the advantages of steel doors?
Wooden door maintenance knowledge: how to do routine maintenance and renovation?
Wooden door maintenance knowledge: how to maintain and refurbish wooden doors
The clever woman Jie Mi original wooden door care 5 big matters needing attention
Knowledge of building materials wooden door solid wood door paint switch furniture
Low Odor Roving,Even Linear Density,No Fuzz In Processing,Roving For Pp Reinforcement
Shandong Fiberglass Group Corp. , https://www.en-glasstex.com